(PKG of 10) 74F257APC Quad 2-Input Multiplexer, PDIP-16, National
Package of 10!
New old stock (NOS), unused, genuine part: National Semiconductor 74F257APC Quad 2-Input Multiplexer with TRI-STATE outputs, PDIP-16
Manufacturer: National Semiconductor
Manufacturer Part Number: 74F257APC
74 Series Part: 74F257
Product Category: Logic ICs, Multiplexers
Product: Selectors / Multiplexers
Logic Family: F
Number of Bits: 4 bit
Number of Input Lines: 2 Input
Number of Output Lines: 2 Output
Number of Circuits: Quad
Supply Voltage - Min: 4.5 V
Supply Voltage - Max: 5.5 V
Package / Case: PDIP-16, Plastic
RoHS: NO
Packaging: Anti-Static; Shipped in cut to size Anti-Static IC tube
General Description
The 74F257A is a quad 2-input multiplexer with TRI-STATE outputs. Four bits of data from two sources can be selected using a Common Data Select input. The four outputs present the selected data in true (non-inverted) form. The outputs may be switched to a high impedance state with a HIGH on the common Output Enable (OE) input, allowing the outputs to interface directly with bus-oriented systems.
Features
■ Multiplexer expansion by tying outputs together
■ Non-inverting TRI-STATE outputs
■ Input clamp diodes limit high-speed termination effects
■ Guaranteed 4000V minimum ESD protection
Description
Package of 10!
New old stock (NOS), unused, genuine part: National Semiconductor 74F257APC Quad 2-Input Multiplexer with TRI-STATE outputs, PDIP-16
Manufacturer: National Semiconductor
Manufacturer Part Number: 74F257APC
74 Series Part: 74F257
Product Category: Logic ICs, Multiplexers
Product: Selectors / Multiplexers
Logic Family: F
Number of Bits: 4 bit
Number of Input Lines: 2 Input
Number of Output Lines: 2 Output
Number of Circuits: Quad
Supply Voltage - Min: 4.5 V
Supply Voltage - Max: 5.5 V
Package / Case: PDIP-16, Plastic
RoHS: NO
Packaging: Anti-Static; Shipped in cut to size Anti-Static IC tube
General Description
The 74F257A is a quad 2-input multiplexer with TRI-STATE outputs. Four bits of data from two sources can be selected using a Common Data Select input. The four outputs present the selected data in true (non-inverted) form. The outputs may be switched to a high impedance state with a HIGH on the common Output Enable (OE) input, allowing the outputs to interface directly with bus-oriented systems.
Features
■ Multiplexer expansion by tying outputs together
■ Non-inverting TRI-STATE outputs
■ Input clamp diodes limit high-speed termination effects
■ Guaranteed 4000V minimum ESD protection
Reviews (0)
Be the first to write a review